Lister Commands - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

5
Commands by Subsystem

:LISTer Commands

Table 67 :LISTer Commands Summary
Command
n/a
:LISTer:DISPlay {{0 |
OFF} | {1 | ON}} (see
page 294)
Introduction to The LISTer subsystem is used to turn on/off the serial decode Lister
:LISTer
display and return data from the Lister display.
Commands
292
Query
:LISTer:DATA? (see
page 293)
:LISTer:DISPlay? (see
page 294)
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
Options and Query Returns
<binary_block> ::=
comma-separated data with
newlines at the end of each row
{0 | 1}