External:impedance - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

:EXTernal:IMPedance

Command Syntax
:EXTernal:IMPedance <value>
<value> ::= {ONEMeg | FIFTy}
The :EXTernal:IMPedance command selects the input impedance setting for
the external trigger. The legal values for this command are ONEMeg
(1 M
You can set external trigger input impedance to FIFTy (50
N O T E
500 MHz, and 1 GHz bandwidth oscilloscope models.
Query Syntax
:EXTernal:IMPedance?
The :EXTernal:IMPedance? query returns the current input impedance
setting for the external trigger.
Return Format
<impedance value><NL>
<impedance value> ::= {ONEM | FIFT}
See Also •
•
•
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
(see page 786)
Ω Ω
) and FIFTy (50
"Introduction to :EXTernal Trigger Commands"
"Introduction to :TRIGger Commands"
":CHANnel<n>:IMPedance"
).
on page 467
on page 223
Commands by Subsystem
Ω
) on the 2-channel, 300 MHz,
on page 254
5
257