5
Commands by Subsystem
:TRIGger:SPI:SOURce:DATA
Command Syntax
:TRIGger:SPI:SOURce:DATA <source>
<source> ::= {CHANnel<n> | EXTernal} for the DSO models
<source> ::= {CHANnel<n> | DIGital0,..,DIGital15} for the MSO models
<n> ::= {1 | 2 | 3 | 4} for the four channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :TRIGger:SPI:SOURce:DATA command sets the source for the SPI serial
data.
Query Syntax
:TRIGger:SPI:SOURce:DATA?
The :TRIGger:SPI:SOURce:DATA? query returns the current source for the
SPI serial data.
Return Format
<source><NL>
See Also
•
•
•
•
•
588
(see
page
786)
"Introduction to :TRIGger Commands"
":TRIGger:SPI:SOURce:CLOCk"
":TRIGger:SPI:SOURce:FRAMe"
":TRIGger:SPI:PATTern:DATA"
":TRIGger:SPI:PATTern:WIDTh"
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
on page 467
on page 587
on page 589
on page 585
on page 586