Trigger:spi:source:clock - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

:TRIGger:SPI:SOURce:CLOCk

Command Syntax
:TRIGger:SPI:SOURce:CLOCk <source>
<source> ::= {CHANnel<n> | EXTernal} for the DSO models
<source> ::= {CHANnel<n> | DIGital0,..,DIGital15} for the MSO models
<n> ::= {1 | 2 | 3 | 4} for the four channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :TRIGger:SPI:SOURce:CLOCk command sets the source for the SPI
serial clock.
Query Syntax
:TRIGger:SPI:SOURce:CLOCk?
The :TRIGger:SPI:SOURce:CLOCk? query returns the current source for the
SPI serial clock.
Return Format
<source><NL>
See Also •
•
•
•
•
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
(see page 786)
"Introduction to :TRIGger Commands"
":TRIGger:SPI:CLOCk:SLOPe"
":TRIGger:SPI:CLOCk:TIMeout"
":TRIGger:SPI:SOURce:FRAMe"
":TRIGger:SPI:SOURce:DATA"
Commands by Subsystem
on page 467
on page 582
on page 583
on page 589
on page 588
5
587