Calibrate:switch - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

5
Commands by Subsystem

:CALibrate:SWITch

Query Syntax
:CALibrate:SWITch?
The :CALibrate:SWITch? query returns the rear- panel calibration protect
(CAL PROTECT) switch state. The value PROTected indicates calibration is
disabled, and UNPRotected indicates calibration is enabled.
Return Format
<switch><NL>
<switch> ::= {PROT | UNPR}
See Also
•
214
(see page 786)
"Introduction to :CALibrate Commands"
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
on page 207