Agilent Technologies InfiniiVision 7000A Series Programmer's Manual page 121

Table 42 Standard Event Status Register (ESR) (continued)
Bit
1
0
Return Format
<status><NL>
<status> ::= 0,..,255; an integer in NR1 format.
Reading the Standard Event Status Register clears it. High or 1 indicates the bit is true.
N O T E
See Also
•
•
•
•
•
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
Name Description
RQL Request Control
OPC Operation Complete
"Introduction to Common (*) Commands"
"*ESE (Standard Event Status Enable)"
"*OPC (Operation Complete)"
"*CLS (Clear Status)"
":SYSTem:ERRor" on page 448
When Set (1 = High = True), Indicates:
The device is requesting control. (Not used.)
Operation is complete.
on page 118
on page 124
on page 117
Commands by Subsystem
on page 116
5
121