Agilent Technologies InfiniiVision 7000A Series Programmer's Manual page 126

5
Commands by Subsystem
The <Factory MSO> <Upgraded MSO> fields indicate whether the unit is a
mixed-signal oscilloscope and, if so, whether it was factory installed
or upgraded from an analog channels only oscilloscope (DSO).
The *OPT? query returns the following:
Module
No modules attached
See Also
•
•
126
"Introduction to Common (*) Commands"
"*IDN (Identification Number)"
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
Module Id
0,0,0,0,MSO,0,0,mem8M,0,0,0,0,0,0,0,0,0,0,0,0,0
,0,0,0,0,0,0
on page 116
on page 122