Trigger:uart:qualifier - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

5
Commands by Subsystem

:TRIGger:UART:QUALifier

Command Syntax
:TRIGger:UART:QUALifier <value>
<value> ::= {EQUal | NOTequal | GREaterthan | LESSthan}
The :TRIGger:UART:QUALifier command selects the data qualifier when
:TYPE is set to RDATa, RD1, RD0, RDX, TDATa, TD1, TD0, or TDX for the
trigger when in UART mode.
Query Syntax
:TRIGger:UART:QUALifier?
The :TRIGger:UART:QUALifier? query returns the current UART trigger
qualifier.
Return Format
<value><NL>
<value> ::= {EQU | NOT | GRE | LESS}
See Also
•
•
•
606
(see page 786)
"Introduction to :TRIGger Commands"
":TRIGger:MODE" on page 473
":TRIGger:UART:TYPE"
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
on page 467
on page 609