Measure:tstop - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

7
Obsolete and Discontinued Commands

:MEASure:TSTOp

Command Syntax
:MEASure:TSTOp <value> [suffix]
<value> ::= time at the stop marker in seconds
[suffix] ::= {s | ms | us | ns | ps}
The :MEASure:TSTOp command moves the stop marker (X2 cursor) to the
specified time with respect to the trigger time.
The short form of this command, TSTO, does not follow the defined Long Form to Short
N O T E
Form Truncation Rules (see
both TSTArt and TSTOp, so sending TST for the TSTOp command produces an error.
The :MEASure:TSTOp command is an obsolete command provided for compatibility to
N O T E
previous oscilloscopes. Use the :MARKer:X2Position command (see
Query Syntax
:MEASure:TSTOp?
The :MEASure:TSTOp? query returns the time at the stop marker (X2
cursor).
Return Format
<value><NL>
<value> ::= time at the stop marker in NR3 format
See Also •
•
•
•
•
•
•
720
(see page 786)
"Introduction to :MARKer Commands"
"Introduction to :MEASure Commands"
":MARKer:X1Position"
":MARKer:X2Position"
":MARKer:XDELta" on page 302
":MEASure:TDELta" on page 715
":MEASure:TSTArt" on page 719
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
page 788). The normal short form "TST" would be the same for
on page 296
on page 312
on page 298
on page 300
page 300) instead.