Agilent Technologies InfiniiVision 7000A Series Programmer's Manual page 31

Changed
Commands
Command
:ACQuire:COUNt (see
:FUNCtion:OPERation (see
:FUNCtion:WINDow (see
Obsolete
Commands
Obsolete Command
:FUNCtion:SOURce (see
page
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
page 185)
page
page 280)
704)
Differences
The :ACQuire:COUNt 1 command has been
deprecated. The AVERage acquisition type with
a count of 1 is functionally equivalent to the
HRESolution acquisition type; however, you
should select the high-resolution acquisition
mode with the :ACQuire:TYPE HRESolution
command instead.
273) The ADD parameter is new, and now that
waveform math can be performed using
channels 3 and 4, this command selects the
operation only.
You can now select the Blackman-Harris FFT
window.
Current Command Equivalent
:FUNCtion:SOURce1 (see
page 277)
What's New
Behavior Differences
Obsolete command has ADD,
SUBTract, and MULTiply
parameters; current command
has GOFT parameter.
1
31