Trigger:lin:pattern:format - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

:TRIGger:LIN:PATTern:FORMat

Command Syntax
:TRIGger:LIN:PATTern:FORMat <base>
<base> ::= {BINary | HEX | DECimal}
The :TRIGger:LIN:PATTern:FORMat command sets the entry (and query)
number base used by the :TRIGger:LIN:PATTern:DATA command. The
default <base> is DECimal.
This command is only valid when the automotive CAN and LIN serial decode option (Option
N O T E
AMS) has been licensed.
Query Syntax
:TRIGger:LIN:PATTern:FORMat?
The :TRIGger:LIN:PATTern:FORMat? query returns the currently set
number base for LIN pattern data.
Return Format
<base><NL>
<base> ::= {BIN | HEX | DEC}
See Also •
•
•
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
(see page 786)
"Introduction to :TRIGger Commands"
":TRIGger:LIN:PATTern:DATA"
":TRIGger:LIN:PATTern:DATA:LENGth"
Commands by Subsystem
on page 467
on page 556
on page 558
5
559