What's New In Version - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

What's New in Version 5.25

New features in version 5.25 of the InfiniiVision 7000 Series oscilloscope
software are:
• The Lister display for showing decoded serial data in tabular format.
• The ability to trigger on and decode I2S serial bus data with a
• FlexRay event triggering.
More detailed descriptions of the new and changed commands appear
below.
New Commands
Command
:CHANnel<n>:PROBe:HEAD[:TYPE] (see
page
:DISPlay:FREeze
:LISTer Commands (see
:MTESt:RMODe:FACTion:MEASure (see
page
:SAVE:LISTer[:STARt] (see
:SBUS:I2S:BASE (see
:TRIGger:FLEXray:EVENt:AUToset
:TRIGger:FLEXray:EVENt:LEVel
:TRIGger:FLEXray:EVENt:SOURce
:TRIGger:FLEXray:EVENt:TYPE (see
:TRIGger:I2S Commands (see
:TRIGger:LIN:PATTern:DATA (see
:TRIGger:LIN:PATTern:DATA:LENGth (see
page
:TRIGger:LIN:PATTern:FORMat (see
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
four- channel oscilloscope that includes the Option SND license.
228)
page 292)
378)
page
page 432)
page
558)
Description
Sets an analog channel probe head type and dB
value.
Freezes the display without stopping currently
running acquisitions.
Commands for turning the Lister display on/off
and for returning the Lister data.
Lets you enable or disable measurements on
mask test failures.
412) Saves the Lister display data to a file.
Determines the base to use for the I2S decode
display.
Automatically changes oscilloscope settings
for the selected FlexRay event trigger type.
Lets you fine-tune the voltage level for the
FlexRay event trigger.
Specifies the FlexRay event trigger source.
page 510) Specifies the FlexRay event type to trigger on.
526) Commands for triggering on I2S signals.
page 556) Sets the data value when triggering on a LIN
frame ID and data.
Sets the byte length of the LIN data string.
page 559) Sets the entry (and query) number base used
by the :TRIGger:LIN:PATTern:DATA command.
1
What's New
25