Measure:vmin - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

5
Commands by Subsystem

:MEASure:VMIN

Command Syntax
:MEASure:VMIN [<source>]
<source> ::= {CHANnel<n> | FUNCtion | MATH}
<n> ::= {1 | 2 | 3 | 4} for the four channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :MEASure:VMIN command installs a screen measurement and starts a
minimum vertical value measurement. If the optional source parameter is
specified, the current source is modified.
Query Syntax
:MEASure:VMIN? [<source>]
The :MEASure:VMIN? query measures and outputs the minimum vertical
value present on the selected waveform.
Return Format
<value><NL>
<value> ::= minimum vertical value of the selected waveform in
See Also
•
•
•
•
•
350
(see page 786)
NR3 format
"Introduction to :MEASure Commands"
":MEASure:SOURce"
":MEASure:VBASe" on page 348
":MEASure:VMAX" on page 349
":MEASure:VPP" on page 351
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
on page 312
on page 337