System:time - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

5
Commands by Subsystem

:SYSTem:TIME

Command Syntax
:SYSTem:TIME <time>
<time> ::= hours,minutes,seconds in NR1 format
The :SYSTem:TIME command sets the system time, using a 24- hour format.
Commas are used as separators. Validity checking is performed to ensure
that the time is valid.
Query Syntax
:SYSTem:TIME? <time>
The :SYSTem:TIME? query returns the current system time.
Return Format
<time><NL>
<time> ::= hours,minutes,seconds in NR1 format
See Also
•
•
454
(see page 786)
"Introduction to :SYSTem Commands"
":SYSTem:DATE" on page 446
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
on page 445