Mtest:amask:units - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

:MTESt:AMASk:UNITs

Command Syntax
:MTESt:AMASk:UNITs <units>
<units> ::= {CURRent | DIVisions}
The :MTESt:AMASk:UNITs command alters the way the mask test
subsystem interprets the tolerance parameters for automasking as defined
by :MTESt:AMASk:XDELta and :MTESt:AMASk:YDELta commands.
• CURRent — the mask test subsystem uses the units as set by the
• DIVisions — the mask test subsystem uses the graticule as the
Query Syntax
:MTESt:AMASk:UNITs?
The :MTESt:AMASk:UNITs query returns the current measurement units
setting for the mask test automask feature.
Return Format
<units><NL>
<units> ::= {CURR | DIV}
See Also
•
•
•
•
•
•
Example Code •
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
(see page 786)
:CHANnel<n>:UNITs command, usually time for
measurement system, so tolerance settings are specified as parts of a
screen division. The mask test subsystem maintains separate XDELta
and YDELta settings for CURRent and DIVisions. Thus, XDELta and
YDELta are not converted to new values when the UNITs setting is
changed.
"Introduction to :MTESt Commands"
":MTESt:AMASk:XDELta"
":MTESt:AMASk:YDELta"
":CHANnel<n>:UNITs"
":MTESt:AMASk:SOURce"
":MTESt:SOURce" on page 390
"Example Code" on page 360
on page 360
on page 366
on page 367
on page 235
on page 364
Commands by Subsystem
Δ Δ
X and voltage for
5
Y.
365