5
Commands by Subsystem
:FUNCtion:DISPlay
Command Syntax
:FUNCtion:DISPlay <display>
<display> ::= {{1 | ON} | {0 | OFF}}
The :FUNCtion:DISPlay command turns the display of the function on or
off. When ON is selected, the function performs as specified using the
other FUNCtion commands. When OFF is selected, function is neither
calculated nor displayed.
Query Syntax
:FUNCtion:DISPlay?
The :FUNCtion:DISPlay? query returns whether the function display is on
or off.
Return Format
<display><NL>
<display> ::= {1 | 0}
See Also
•
•
•
•
268
(see
page
786)
"Introduction to :FUNCtion Commands"
":VIEW"
on page 180
":BLANk"
on page 148
":STATus"
on page 177
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
on page 266