System:protection:lock - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

5
Commands by Subsystem

:SYSTem:PROTection:LOCK

(see page 786)
Command Syntax
:SYSTem:PROTection:LOCK <value>
<value> ::= {{1 | ON} | {0 | OFF}}
The :SYSTem:PROTection:LOCK command disables the fifty ohm impedance
setting for all analog channels.
Query Syntax
:SYSTem:PROTection:LOCK?
The :SYSTem:PROTection:LOCK? query returns the analog channel
protection lock status.
Return Format
<value><NL>
<value> ::= {1 | 0}
See Also
• "Introduction to :SYSTem Commands" on page 445
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide 451