Sbus:uart:count:txframes - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

:SBUS:UART:COUNt:TXFRames

Query Syntax
:SBUS:UART:COUNt:TXFRames?
Returns the UART Tx frame count.
This command is only valid on 4 (analog) channel oscilloscope models when the
N O T E
UART/RS-232 triggering and serial decode option (Option 232) has been licensed.
Return Format
<frame_count><NL>
<frame_count> ::= integer in NR1 format
Errors •
See Also •
•
•
•
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
(see page 786)
"- 241, Hardware missing"
":SBUS:UART:COUNt:RESet"
"Introduction to :SBUS Commands"
":SBUS:MODE" on page 436
":TRIGger:UART Commands"
on page 745
on page 441
on page 421
on page 596
Commands by Subsystem
5
443