Measure:vratio - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

5
Commands by Subsystem

:MEASure:VRATio

Command Syntax
:MEASure:VRATio [<source1>][,<source2>]
<source1>, <source2> ::= {CHANnel<n> | FUNCtion | MATH}
<n> ::= {1 | 2 | 3 | 4} for the four channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :MEASure:VRATio command places the instrument in the continuous
measurement mode and starts a ratio measurement.
Query Syntax
:MEASure:VRATio? [<source1>][,<source2>]
The :MEASure:VRATio? query measures and returns the ratio of AC RMS
values of the specified sources expressed as dB.
Return Format
<value><NL>
<value> ::= the ratio value in dB in NR3 format
See Also •
•
•
352
(see page 786)
"Introduction to :MEASure Commands"
":MEASure:VRMS" on page 353
":MEASure:SOURce"
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
on page 312
on page 337