Mtest:lock - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

:MTESt:LOCK

Command Syntax
:MTESt:LOCK <on_off>
<on_off> ::= {{1 | ON} | {0 | OFF}}
The :MTESt:LOCK command enables or disables the mask lock feature:
• ON — Locks a mask to the SOURce. As the vertical or horizontal scaling
• OFF — The mask is static and does not move.
Query Syntax
:MTESt:LOCK?
The :MTESt:LOCK? query returns the current mask lock setting.
Return Format
<on_off><NL>
<on_off> ::= {1 | 0}
See Also •
•
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
(see page 786)
or position of the SOURce changes, the mask is redrawn accordingly.
"Introduction to :MTESt Commands"
":MTESt:SOURce" on page 390
Commands by Subsystem
on page 360
5
375