Function:operation - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

:FUNCtion:OPERation

Command Syntax
:FUNCtion:OPERation <operation>
<operation> ::= {ADD | SUBTract | MULTiply | FFT}
The :FUNCtion:OPERation command sets the desired waveform math
operation:
• ADD — Source1 + source2.
• SUBTract — Source1 - source2.
• MULTiply — Source1 * source2.
• FFT — Fast Fourier Transform on the selected waveform source.
When the operation is ADD, SUBTract, or MULTiply, the
:FUNCtion:SOURce1 and :FUNCtion:SOURce2 commands are used to select
source1 and source2. For FFT, the :FUNCtion:SOURce1 command selects
the waveform source.
Query Syntax
:FUNCtion:OPERation?
The :FUNCtion:OPERation? query returns the current operation for the
selected function.
Return Format
<operation><NL>
<operation> ::= {ADD | SUBT | MULT | FFT}
See Also •
•
•
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
(see page 790)
"Introduction to :FUNCtion Commands"
":FUNCtion:SOURce1"
":FUNCtion:SOURce2"
on page 278
on page 293
on page 294
16
:FUNCtion Commands
289