Recall:mask[:Start] - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

5
Commands by Subsystem

:RECall:MASK[:STARt]

Command Syntax
:RECall:MASK[:STARt] [<file_spec>]
<file_spec> ::= {<internal_loc> | <file_name>}
<internal_loc> ::= 0-3; an integer in NR1 format
<file_name> ::= quoted ASCII string
The :RECall:MASK[:STARt] command recalls a mask.
If a file extension is provided as part of a specified <file_name>, it must be ".msk".
N O T E
See Also •
•
•
•
400
(see page 786)
"Introduction to :RECall Commands"
":RECall:FILename" on page 398
":SAVE:MASK[:STARt]"
":MTESt:DATA" on page 372
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
on page 397
on page 413