Table of Contents
Advertisement
5
Commands by Subsystem
:TRIGger:LIN:PATTern:DATA:LENGth
Command Syntax
:TRIGger:LIN:PATTern:DATA:LENGth <length>
<length> ::= integer from 1 to 8 in NR1 format
The :TRIGger:LIN:PATTern:DATA:LENGth command sets the number of
8- bit bytes in the LIN data string. The number of bytes in the string can
be anywhere from 0 bytes to 8 bytes (64 bits). The value for these bytes is
set by the :TRIGger:LIN:PATTern:DATA command.
This command is only valid when the automotive CAN and LIN serial decode option (Option
N O T E
AMS) has been licensed.
Query Syntax
:TRIGger:LIN:PATTern:DATA:LENGth?
The :TRIGger:LIN:PATTern:DATA:LENGth? query returns the current LIN
data pattern length setting.
Return Format
<count><NL>
<count> ::= integer from 1 to 8 in NR1 format
Errors
•
See Also
•
•
•
558
(see
page
786)
"- 241, Hardware missing"
"Introduction to :TRIGger Commands"
":TRIGger:LIN:PATTern:DATA"
":TRIGger:LIN:SOURce"
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
on page 745
on page 467
on page 556
on page 562
Hide quick links:
Advertisement
Table of Contents
