Channel<N>:Display - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

5
Commands by Subsystem
:CHANnel<n>:DISPlay
Command Syntax
:CHANnel<n>:DISPlay <display value>
<display value> ::= {{1 | ON} | {0 | OFF}}
<n> ::= {1 | 2 | 3 | 4} for the four channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :CHANnel<n>:DISPlay command turns the display of the specified
channel on or off.
Query Syntax
:CHANnel<n>:DISPlay?
The :CHANnel<n>:DISPlay? query returns the current display setting for
the specified channel.
Return Format
<display value><NL>
<display value> ::= {1 | 0}
See Also •
•
•
•
•
•
222
(see page 786)
"Introduction to :CHANnel<n> Commands"
":VIEW" on page 180
":BLANk" on page 148
":STATus" on page 177
":POD<n>:DISPlay" on page 393
":DIGital<n>:DISPlay"
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
on page 239
on page 218