Print - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

:PRINt

Command Syntax
:PRINt [<options>]
<options> ::= [<print option>][,..,<print option>]
<print option> ::= {COLor | GRAYscale | PRINter0 | BMP8bit | BMP | PNG
The <print option> parameter may be repeated up to 5 times.
The PRINt command formats the output according to the currently
selected format (device). If an option is not specified, the value selected in
the Print Config menu is used. Refer to
for more information.
See Also •
•
•
•
•
•
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
(see page 786)
| NOFactors | FACTors}
"Introduction to Root (:) Commands"
"Introduction to :HARDcopy Commands"
":HARDcopy:FORMat"
":HARDcopy:FACTors"
":HARDcopy:GRAYscale"
":DISPlay:DATA" on page 247
":HARDcopy:FORMat"
on page 141
on page 282
on page 709
on page 285
on page 710
Commands by Subsystem
on page 709
5
173