Waveform:xincrement - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

5
Commands by Subsystem

:WAVeform:XINCrement

Query Syntax
:WAVeform:XINCrement?
The :WAVeform:XINCrement? query returns the x- increment value for the
currently specified source. This value is the time difference between
consecutive data points in seconds.
Return Format
<value><NL>
<value> ::= x-increment in the current preamble in 64-bit
See Also •
•
Example Code
•
646
(see page 786)
floating point NR3 format
"Introduction to :WAVeform Commands"
":WAVeform:PREamble"
"Example Code" on page 634
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
on page 618
on page 633