Mtest:rmode - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

:MTESt:RMODe

Command Syntax
:MTESt:RMODe <rmode>
<rmode> ::= {FORever | SIGMa | TIME | WAVeforms}
The :MTESt:RMODe command specifies the termination conditions for the
mask test:
• FORever — the mask test runs until it is turned off.
• SIGMa — the mask test runs until the Sigma level is reached. This level
• TIME — the mask test runs for a fixed amount of time. The amount of
• WAVeforms — the mask test runs until a fixed number of waveforms are
Query Syntax
:MTESt:RMODe?
The :MTESt:RMODe? query returns the currently set termination condition.
Return Format
<rmode><NL>
<rmode> ::= {FOR | SIGM | TIME | WAV}
See Also
•
•
•
•
Example Code •
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
(see page 786)
is set by the ":MTESt:RMODe:SIGMa"
time is set by the ":MTESt:RMODe:TIME"
acquired. The number of waveforms is set by the
":MTESt:RMODe:WAVeforms"
"Introduction to :MTESt Commands"
":MTESt:RMODe:SIGMa"
":MTESt:RMODe:TIME"
":MTESt:RMODe:WAVeforms"
"Example Code" on page 360
on page 382 command.
on page 383 command.
on page 384 command.
on page 360
on page 382
on page 383
on page 384
Commands by Subsystem
5
377