Save:image:format - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

:SAVE:IMAGe:FORMat

Command Syntax
:SAVE:IMAGe:FORMat <format>
<format> ::= {TIFF | {BMP | BMP24bit} | BMP8bit | PNG}
The :SAVE:IMAGe:FORMat command sets the image format type.
Query Syntax
:SAVE:IMAGe:FORMat?
The :SAVE:IMAGe:FORMat? query returns the selected image format type.
Return Format
<format><NL>
<format> ::= {TIFF | BMP | BMP8 | PNG | NONE}
When NONE is returned, it indicates that a waveform data file format is
currently selected.
See Also •
•
•
•
•
•
•
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
(see page 786)
"Introduction to :SAVE Commands"
":SAVE:IMAGe[:STARt]"
":SAVE:IMAGe:AREA"
":SAVE:IMAGe:FACTors"
":SAVE:IMAGe:INKSaver"
":SAVE:IMAGe:PALette"
":SAVE:WAVeform:FORMat"
on page 404
on page 406
on page 407
on page 408
on page 410
on page 411
on page 417
Commands by Subsystem
5
409