Waveform:xorigin - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

:WAVeform:XORigin

Query Syntax
:WAVeform:XORigin?
The :WAVeform:XORigin? query returns the x- origin value for the currently
specified source. XORigin is the X- axis value of the data point specified by
the :WAVeform:XREFerence value. In this product, that is always the
X- axis value of the first data point (XREFerence = 0).
Return Format
<value><NL>
<value> ::= x-origin value in the current preamble in 64-bit
See Also
•
•
•
Example Code •
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
(see page 786)
floating point NR3 format
"Introduction to :WAVeform Commands"
":WAVeform:PREamble"
":WAVeform:XREFerence"
"Example Code" on page 634
on page 618
on page 633
on page 648
Commands by Subsystem
5
647