Trigger:i2S:audio - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

:TRIGger:I2S:AUDio

Command Syntax
:TRIGger:I2S:AUDio <audio_ch>
<audio_ch> ::= {RIGHt | LEFT | EITHer}
The :TRIGger:I2S:AUDio command specifies the audio channel to trigger
on:
• RIGHt — right channel.
• LEFT— left channel.
• EITHer — right channel.
Query Syntax
:TRIGger:I2S:AUDio?
The :TRIGger:I2S:AUDio? query returns the current audio channel for the
I2S trigger.
Return Format
<audio_ch><NL>
<audio_ch> ::= {RIGH | LEFT | EITH}
See Also
•
•
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
(see page 786)
"Introduction to :TRIGger Commands"
":TRIGger:I2S:TRIGger"
on page 467
on page 540
Commands by Subsystem
5
529