Trigger:flexray:baudrate - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

:TRIGger:FLEXray:BAUDrate

Command Syntax
:TRIGger:FLEXray:BAUDrate <baudrate>
<baudrate> ::= {2500000 | 5000000 | 10000000}
The :TRIGger:FLEXray:BAUDrate command specifies the baud rate as
2.5 Mb/s, 5 Mb/s, or 10 Mb/s.
This command is only valid on 4 (analog) channel oscilloscope models when the FlexRay
N O T E
triggering and serial decode option (Option FLX) has been licensed.
Query Syntax
:TRIGger:FLEXray:BAUDrate?
The :TRIGger:FLEXray:BAUDrate? query returns the current baud rate
setting.
Return Format
<baudrate><NL>
<baudrate> ::= {2500000 | 5000000 | 10000000}
See Also
•
•
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
(see page 786)
"Introduction to :TRIGger Commands"
":TRIGger:FLEXray Commands"
Commands by Subsystem
on page 467
on page 505
5
507