Save:image:palette - Agilent Technologies InfiniiVision 7000A Series Programmer's Manual

:SAVE:IMAGe:PALette

Command Syntax
:SAVE:IMAGe:PALette <palette>
<palette> ::= {COLor | GRAYscale | MONochrome}
The :SAVE:IMAGe:PALette command sets the image palette color.
MONochrome is the only valid choice when the :SAVE:IMAGe:FORMat is TIFF. COLor and
N O T E
GRAYscale are the only valid choices when the format is not TIFF.
Query Syntax
:SAVE:IMAGe:PALette?
The :SAVE:IMAGe:PALette? query returns the selected image palette color.
Return Format
<palette><NL>
<palette> ::= {COL | GRAY | MON}
See Also •
•
•
•
•
•
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
(see page 786)
"Introduction to :SAVE Commands"
":SAVE:IMAGe[:STARt]"
":SAVE:IMAGe:AREA"
":SAVE:IMAGe:FACTors"
":SAVE:IMAGe:FORMat"
":SAVE:IMAGe:INKSaver"
on page 404
on page 406
on page 407
on page 408
on page 409
on page 410
Commands by Subsystem
5
411