What's New In Version - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

1
What's New

What's New in Version 5.15

New features in version 5.15 of the InfiniiVision 5000 Series oscilloscope
software are:
• Waveform math can be performed using channels 3 and 4, and there is
• Ratio of AC RMS values measurement.
• Analog channel impedance protection lock.
More detailed descriptions of the new and changed commands appear
below.
New Commands
Command
:FUNCtion:GOFT:OPERation (see
:FUNCtion:GOFT:SOURce1 (see
:FUNCtion:GOFT:SOURce2 (see
:FUNCtion:SOURce1 (see
:FUNCtion:SOURce2 (see
:MEASure:VRATio (see
:SYSTem:PROTection:LOCK (see
20
a new ADD operator.
page
page
page 291)
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
Description
page 219) Selects the math operation for the internal g(t)
source that can be used as the input to the FFT,
INTegrate, DIFFerentiate, and SQRT functions.
page 220) Selects the first input channel for the g(t)
source.
page 221) Selects the second input channel for the g(t)
source.
227) Selects the first source for the ADD, SUBTract,
and MULTiply arithmetic operations or the
single source for the FFT, INTegrate,
DIFFerentiate, and SQRT functions.
228) Selects the second input channel for the ADD,
SUBTract, and MULTiply arithmetic operations.
Measures and returns the ratio of AC RMS
values of the specified sources expressed in
dB.
page 339) Disables/enables the fifty ohm input
impedance setting.