What's New In Version 4.10 - Agilent Technologies MSO6102A Programmer's Reference Manual

1
What's New

What's New in Version 4.10

New features in version 4.10 of the 6000 Series oscilloscope software are:
• The ability to trigger on and decode FlexRay serial bus data using a
• The square root waveform math function.
• Several new hardcopy printer drivers.
More detailed descriptions of the new and changed commands appear
below.
New Commands
Command
:SBUS:BUSDoctor:ADDRess (see
:SBUS:BUSDoctor:BAUDrate (see
:SBUS:BUSDoctor:CHANnel (see
:SBUS:BUSDoctor:MODE (see
:SBUS:FLEXray:COUNt:NULL? (see
:SBUS:FLEXray:COUNt:RESet (see
:SBUS:FLEXray:COUNt:SYNC? (see
:SBUS:FLEXray:COUNt:TOTal? (see
:TRIGger:FLEXray:ERRor:TYPE (see
:TRIGger:FLEXray:FRAMe:CCBase (see
page
:TRIGger:FLEXray:FRAMe:CCRepetition (see
page
:TRIGger:FLEXray:FRAMe:ID (see
:TRIGger:FLEXray:FRAMe:TYPE (see
:TRIGger:FLEXray:TIME:CBASe (see
:TRIGger:FLEXray:TIME:CREPetition (see
page
18
Decomsys BusDoctor 2 protocol analyzer with a four- channel
mixed- signal oscilloscope that includes the Option FRS license.
373)
374)
378)
Description
page 294) Sets/queries the four fields in the BusDoctor
LAN IP Address.
page 295) Sets/queries the baud rate for the BusDosctor
from 2.5 Mb/s to 10 Mb/s.
page 296) Sets/queries the FlexRay channel that the
BusDoctor analyzes/preprocesses.
page 297) Sets/queries the operating mode of the
BusDoctor.
page 304) Returns the FlexRay null frame count.
page 305) Resets the FlexRay frame counters.
page 306) Returns the FlexRay sync frame count.
page 307) Returns the FlexRay total frame count.
page 371) Sets/queries the FlexRay error type to trigger
on.
Sets/queries the base of the FlexRay cycle
count (in the frame header) to trigger on.
Sets/queries the repetition number of the
FlexRay cycle count (in the frame header) to
trigger on.
page 375) Sets/queries the FlexRay frame ID to trigger
on.
page 376) Sets/queries the FlexRay frame type to trigger
on.
page 377) Sets/queries the base of the FlexRay cycle to
trigger on.
Sets/queries the repetition number of the
FlexRay cycle to trigger on.
Agilent 6000 Series Oscilloscopes Programmer's Reference