Upgrading a Call Server from CP PII to CP PIV
Connecting a terminal
Procedure 10
Connecting a terminal
A maintenance terminal is required to access the Call Servers during the
upgrade procedure.
1
Connect a terminal to the COM 1 port on the faceplate of CP PII card of
the inactive Call Server.
2
The settings for the terminal are:
a.
Terminal type: VT100
b.
9600 Baud
c.
Data bits: 7
d.
Parity: odd
e.
Stop bits: 1
f.
Flow control: none
Note: If the telnet session is set to 7 odd 1 versus 8 none 1,the system
messages generate before the INI prints, otherwise a portion of the
database conversion reference of lost TN's does not appear.
Printing site data
Print site data to preserve a record of the system configuration (Table 14 on
page
112). Verify that all information is correct. Make corrections as
necessary.
Avaya Communication Server 1000E Upgrade
End of Procedure
Hardware Upgrade Procedures
Page 111 of 226