Chapter 5: Ip Interface Translations; Starting Sat Terminal Emulation - Avaya S8500 Installing And Configuring

Chapter 5: IP interface translations

To administer IPSI circuit packs, issue Communication Manager SAT commands on a terminal
emulation program.
For Communication Manager terminal emulation, use a program such as Avaya Native
Configuration Manager, Avaya Terminal Emulation, or HyperTerminal.
You also can use Avaya Site Administration (ASA) to issue SAT commands. You must use ASA
Release 2.1, update 1, or a later version to administer new features in Release 3.0 of Avaya
Communication Manager.
Perform these tasks to administer IPSI circuit packs:

Starting SAT terminal emulation

●
Inputting initial system translations
●
Adding media gateways
●
Enabling IPSI
●
Adding the IPSI to the system
●
Setting alarm activation level
●
Saving translations
●
Starting SAT terminal emulation
For Communication Manager SAT terminal emulation, use a program such as Avaya Native
Configuration Manager or HyperTerminal. You also can use Avaya Site Administration to issue
SAT commands.
1. On the services laptop, open a VT-100 terminal emulation session.
2. If using a serial modem connection, administer the terminal emulation port settings:
9600 baud
●
No parity
●
8 data bits
●
1 stop bit
●
No flow control
●
5023 for the port
●
3. Log into the media server as craft.
Installing and Configuring the Avaya S8500 Media Server
on page 57
on page 58
on page 59
on page 60
on page 61
on page 61
on page 58
57
February 2006