Chrysler 2005 Crossfire SRT6 Service Manual page 2027

ZH
(P0122) APPS SIGNAL 1 CIRCUIT LOW (CONTINUED)
7.
APP SENSOR SIGNAL CIRCUIT OPEN
With the ignition off.
Measure the resistance of the APP Sensor Signal 1 circuit from the
APP Sensor harness connector to the PCM C4 harness connector.
Is the resistance below 5.0 ohms?
Yes >> Go To 9
No >> Repair the APP Sensor Signal circuit for an open.
Perform POWERTRAIN VERIFICATION TEST - VER 2.
8.
APP SENSOR 5-VOLT SUPPLY CIRCUIT OPEN
With the ignition on.
Measure the resistance of the APP Sensor 5-Volt Supply circuit from
the APP Sensor harness connector to the PCM C4 harness connector.
Is the resistance below 5.0 ohms?
Yes >> Go To 9
No >> Repair the APP Sensor 5-Volt Supply circuit for an open.
Perform POWERTRAIN VERIFICATION TEST - VER 2.
ENGINE - ELECTRICAL DIAGNOSTICS 9 - 103