Configure Wireless Ports Location - Extreme Networks ExtremeWare Command Reference Manual

configure wireless ports location

configure wireless ports <portlist> location <location name>
Description
Configures the physical location of the access point (AP) for the specified port or ports.
Syntax Description
portlist
location name
Default
Unknown Location
Usage Guidelines
Use this command to indicate the physical location of the access point (AP) for the specified port or
ports. For example, you could designate a physical location as follows:
Funk Radius can use this attribute for authentication.
Example
The following command configures the location, cube_a7, on port 18:
configure wireless ports 18 location cube_a7
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.
ExtremeWare 7.5 Command Reference Guide
Specifies one or more ports or slots and ports. an be one or more port numbers. May be in the
form 1, 2, 1:2, 3-5.
Identifies the location to be configured.
configure wireless ports location
bldg 1, pole 14, cube 7
.
1297