Configure Wireless Ports Interface Client-Scan Added-Trap - Extreme Networks ExtremeWare Command Reference Manual

Wireless Commands

configure wireless ports interface client-scan added-trap

configure wireless ports [<portlist> | all] interface [1 | 2] client-scan
added-trap [on |off]
Description
Enables or disables traps from the client-scan feature when a new client is detected.
Syntax Description
portlist
all
interface
on
off
Default
Off.
Usage Guidelines
Enabling traps can saturate management stations if an area is heavily populated.
Example
The following command enables traps for port 1:5 and interface 2:
configure wireless port 1:5 interface 2 client-scan added-trap on
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.
1286
Specifies one or more ports or slots and ports. an be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
Specifies all ports.
Specifies an interface: 1 or 2.
Enables traps when a new client is detected.
Disables traps when a new client is detected.
ExtremeWare 7.5 Command Reference Guide