Enable Wireless Ports Interface Ap-Scan Off-Channel - Extreme Networks ExtremeWare Command Reference Manual

enable wireless ports interface ap-scan off-channel

enable wireless ports <portlist> interface [1 | 2] ap-scan off-channel [at
| every] <time>
Description
Starts the access point (AP) scan on the indicated interface at the specified time.
Syntax Description
portlist Specifies one or more ports or slots and ports. an be one or more port numbers. May be in the form
1, 2, 1:2, 3-5.
interface Specifies an interface: 1 or 2.
at Specifies a once-only start time for a scan.
every Specifies to start the scan every day at the specified time.
time Specifies the hour in the format (0-23)
Default
N/A
Usage Guidelines
Use this command to schedule the off-channel AP scan. During an "off-channel" scan, the Altitude 300
is not available for user traffic.
Example
The following command enables port 23 using interface 1:
enable wireless ports 23 interface 1 ap-scan off-channel at 18
History
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.
ExtremeWare 7.5 Command Reference Guide
enable wireless ports interface ap-scan off-channel
1319