Configure Wireless Ports Ipaddress - Extreme Networks ExtremeWare Command Reference Manual

Wireless Commands

configure wireless ports ipaddress

configure wireless ports <portlist> ipaddress <address>
Description
Configures the source IP address for the specified port or ports.
Syntax Description
portlist Specifies one or more ports or slots and ports. an be one or more port numbers. May be in the form
1, 2, 1:2, 3-5.
address Indicates the source IP address. The IP address must be an IP address on the management VLAN.
Default
The default address is 0.0.0.0.
Usage Guidelines
The source IP address can be public or private IP addresses in class A through class C.
Example
The following command configures the default IP address for port 1:18 on the Summit 300-48:
configure wireless ports 1:18 192.168.0.100.18
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.
1296 ExtremeWare 7.5 Command Reference Guide