Configure Wireless Ports Interface Ap-Scan Results Timeout - Extreme Networks ExtremeWare Command Reference Manual

configure wireless ports interface ap-scan results timeout

configure wireless ports [<portlist> | all] interface [1 | 2] ap-scan
results timeout <time>
Description
This command sets the timeout threshold that sets when entries are aged out from the table.
Syntax Description
portlist
all
interface
time
Default
300 seconds.
Usage Guidelines
Use this command to specify the age-out time for the clients in the results table.
Example
The following command configures port 1:7 and interface 1 to have a timeout threshold of 5 seconds:
configure wireless ports 1:7 interface 1 ap-scan results timeout 5
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.
ExtremeWare 7.5 Command Reference Guide
Specifies one or more ports or slots and ports. an be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
Specifies all ports.
Specifies an interface: 1 or 2.
Specifies the time in seconds before an entry is aged out of the results table.
Valid numbers are between 0 and n (any number).
configure wireless ports interface ap-scan results timeout
1279