Configure Wireless Ports Interface Client-Scan Removed-Trap - Extreme Networks ExtremeWare Command Reference Manual

configure wireless ports interface client-scan
removed-trap
configure wireless ports [<portlist> | all] interface [1 | 2] client-scan
removed-trap [on |off]
Description
Enables or disables traps from the client-scan feature when a new client has aged-out of the table.
Syntax Description
portlist
all
interface
on
off
Default
Off.
Usage Guidelines
Enabling traps can saturate management stations if an area is heavily populated.
Example
The following command disables traps for port 1:9 and interface 1:
configure wireless port 1:9 interface 1 client-scan removed-trap off
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.
ExtremeWare 7.5 Command Reference Guide
Specifies one or more ports or slots and ports. an be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
Specifies all ports.
Specifies an interface: 1 or 2.
Enables traps when a client has aged out of the table.
Disables traps when a client has aged out of the table.

configure wireless ports interface client-scan removed-trap

1287