Disable Wireless Ports Interface Client-Scan - Extreme Networks ExtremeWare Command Reference Manual

Wireless Commands

disable wireless ports interface client-scan

disable wireless ports <portlist> interface [1 | 2] client-scan
Description
Disables the client scan feature on the specified wireless interface.
Syntax Description
portlist
interface
Default
N/A
Usage Guidelines
Use this command to disable the client scan feature on the specified wireless interface. Disabling the
feature can improve performance if the network is heavily populated and beginning to show
degradation.
Example
The following command disables port 1:31 and interface 2:
disable wireless ports 1:31 interface 2 client-scan
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.
1310
Specifies one or more ports or slots and ports. an be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
Specifies an interface: 1 or 2.
ExtremeWare 7.5 Command Reference Guide