Show Rf-Profile - Extreme Networks ExtremeWare Command Reference Manual

Wireless Commands

show rf-profile

show rf-profile {<profile_name>}
Description
Displays configuration attributes for a particular RF profile or all RF profiles.
Syntax Description
profile_name Specifies the name of the RF profile whose configuration is to be displayed. If you do not enter an
RF profile name, configuration attributes will be displayed for all RF profiles.
Default
All
Usage Guidelines
Use this command to display configuration attributes for a particular RF profile or all RF profiles. If you
do not enter an RF profile name, configuration attributes are displayed for all RF profiles.
Example
The following command displays configuration information about the RF profile named rfprof_alpha:
show rf-profile rfprof_alpha
The output from this command is similar to:
Profile Name:
Mode:
Beacon Interval:
DTIM:
Fragmentation Length:
RTS Threshold:
Preamble:
Short Retry:
Long Retry:
No interfaces bound to this RF profile
The following command displays configuration information about all RF profiles:
show rf-profile
The output from this command is similar to:
Profile Name:
Mode:
Beacon Interval:
DTIM:
Fragmentation Length:
RTS Threshold:
Preamble:
Short Retry:
1330
rfprof_alpha
G
1000
100
2345
2330
Long
4
7
DEFAULT_A
A
40
2
2345
2330
Short
4
ExtremeWare 7.5 Command Reference Guide