Wireless Commands
enable wireless ports interface iapp
enable wireless ports [<portlist> | all] interface [1 | 2] iapp
Description
Enables Inter-Access Point Protocol (IAPP) on a per interface basis.
Syntax Description
portlist
Specifies one or more ports or slots and ports. an be one or more port numbers. May be in the form 1,
2, 1:2, 3-5.
all
Specifies all ports.
interface
Specifies an interface: 1 or 2.
Default
Enabled.
Usage Guidelines
Use this command to enable IAPP for the selected ports and interface.
Example
The following example enables port 1:15 and interface 1 for IAPP:
enable wireless ports 1:15 interface 1 iapp
History
Platform Availability
1322
ExtremeWare 7.5 Command Reference Guide