Configure Wireless Ports Interface Ap-Scan Off-Channel - Extreme Networks ExtremeWare Command Reference Manual

Wireless Commands

configure wireless ports interface ap-scan off-channel

configure wireless ports [<portlist> | all] interface [1 | 2] ap-scan
off-channel <add | del> {current-channel | channel-number | all-channels |
every-channel}
Description
Adds or removes specific channels for the off-channel access point (AP) scan.
Syntax Description
portlist
all
interface
add
del
current-channel
channel-number
all-channels
every-channel
Default
All channels.
Usage Guidelines
Use this command when the AP scan must be started on a particular interface.
Example
The following command causes scans on the current channel for wireless port 1:5 using interface 2:
configure wireless ports 1:5 interface 2 add current channel
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.
1272
Specifies one or more ports or slots and ports. an be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
Specifies all ports.
Specifies an interface: 1 or 2.
Specifies to add the specific channel.
Specifies to delete the specific channel.
Specifies to perform the scan on the current channel only.
Specifies to perform the scan on the channel indicated.
Specifies to perform the scan on all channels in a given country code.
Specifies to perform the scan on all channels regardless of the country code.
No beacons are sent on out-of-country-code channels.
ExtremeWare 7.5 Command Reference Guide