Configure Wireless Ports Interface Client-Scan Results Timeout - Extreme Networks ExtremeWare Command Reference Manual

configure wireless ports interface client-scan results
timeout
configure wireless ports <portlist> interface [1 | 2] client-scan results
timeout <number>
Description
Configures the timeout period for entries in the client scan information table.
Syntax Description
portlist
interface
number
Default
600 seconds.
Usage Guidelines
Use this command to specify the age-out time for the clients in the client-scan results table.
Example
The following command sets the timeout period to 150 seconds for entries in the client scan information
table:
configure wireless ports 1:5-1:20 interface 2 client-scan results timeout 150
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.
ExtremeWare 7.5 Command Reference Guide
Specifies one or more ports or slots and ports. an be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
Specifies an interface: 1 or 2.
Specifies the timeout in seconds for the client scan information table. Valid
numbers are between 0 and n (any number).

configure wireless ports interface client-scan results timeout

1289