Clear Wireless Ports Interface Client-Scan Results - Extreme Networks ExtremeWare Command Reference Manual

Wireless Commands

clear wireless ports interface client-scan results

clear wireless ports [<portlist> | all] interface [1 | 2] client-scan
results [<hexoctet> | all]
Description
Clears the contents of the client scan information table or for a specific client MAC address.
Syntax Description
portlist Specifies one or more ports or slots and ports. an be one or more port numbers. May be in the form
1, 2, 1:2, 3-5.
all Specifies all ports.
interface Specifies an interface: 1 or 2.
hexoctet Specifies to use the hexadecimal value to identify a particular entry in the client scan information
table.
all Specifies all entries in the client scan information table.
Default
N/A
Usage Guidelines
Use this command to clear the client scan results on any interface: 1 or 2.
Examples
The following example clears ports 15 and interface 1 of all client-scan results:
clear wireless ports 15 interface 1 client-scan results all
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.
1252 ExtremeWare 7.5 Command Reference Guide