Configure Wireless Ports Force-Disassociation - Extreme Networks ExtremeWare Command Reference Manual

configure wireless ports force-disassociation

configure wireless ports <portlist> force-disassociation [all-clients
[every <hour <0-23>> <minute <0-59>> | time <month <1-12>> <day> <year
<yyyy>> <hour <0-23>> <minute <0-59>>] | cancel-scheduler | <mac-address>]
Description
Configures the client force-disassociation capability.
Syntax Description
portlist
all-clients
every
time
cancel-scheduler
mac-address
Default
No schedule.
Usage Guidelines
Force disassociation permits client user disassociation based on a recurring schedule, a date and time, or
a particular MAC address. You can also disassociate a user immediately. You can specify access based
on a preferred time periods, such as during off-hours, weekends, and holidays. You can also set up a
user policy on a RADIUS server to allow user authentication based on time of day.
Example
The following command configures ports 1:18 to force disassociate all clients every day at noon:.
configure wireless ports 1:18 force-disassociation all-clients every 12 0
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.
ExtremeWare 7.5 Command Reference Guide
Specifies one or more ports or slots and ports. an be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
Specifies all clients associated with the port list.
Specifies a repeating disassociation.
Specifies a single disassociation at a specific time and date. If you do not
specify the every or time parameters, the user immediately disassociates.
Specifies to disable forced disassociation.
Specifies the MAC address of the client network interface card.
configure wireless ports force-disassociation
1269